Wood Pellet Stove Repairs in Ireland
Wood pellet stove repairs matter in Ireland because a small fault can quickly affect heat output, safety, and running costs.
You want clear guidance on what tends to go wrong, when a repair is enough versus when a full service makes more sense, and how to avoid repeat call-outs. Typical issues include ignition failures, poor flame or sooting from incorrect air settings, pellet feed problems, sensor or control faults, and draught or flue blockages that trigger shutdowns. You also need to know what a technician can do on-site, when genuine spare parts are required, and how credentials such as RGII, OFTEC, and SEAI registration support compliant, traceable work in Irish homes.
With that in mind, it helps to start with a practical picture of the most common repair needs and why routine servicing keeps your stove dependable through the heating season.
Keep your wood pellet stove reliable by spotting common faults early, fixing the simple causes safely, and knowing when a qualified technician is the right call. Focus on the three things that stop heat in Irish homes: pellet feeding, safe ignition, and proper airflow through a fan-assisted flue system. Pay attention to how fuel quality and Ireland’s damp climate affect pellet storage and burn quality, and treat error codes as useful clues rather than a dead end. Stay on top of routine cleaning and annual servicing because many manufacturers expect it, and it often makes the difference between a quick reset and an expensive parts swap. For example, some pellet stove manuals state the appliance should be serviced at least once a year, depending on usage, which aligns with how most installers approach ongoing reliability in Ireland. A bit of practical upkeep and the right troubleshooting habits keep the heat steady when you need it most.
Overview of Wood Pellet Stove Repairs
Wood pellet stove repairs are the fault-finding and part-replacement jobs that get your stove feeding pellets, igniting, and burning cleanly again. In Irish homes, they matter because pellet stoves rely on electronics, sensors, and a fan-driven flue, so small faults can stop heat completely. Repairs range from quick clean-and-reset fixes to component swaps, and the right approach depends on the model, installation, and fuel quality, which is why it helps to recognise the most common symptoms before you start changing parts.
What typically goes wrong in Ireland
This is worth understanding because most “breakdowns” start as performance symptoms. Common issues include failed igniters, noisy or weak fans, pellet feed jams, dirty burn pots, faulty temperature or pressure sensors, and error codes after power cuts. Ireland’s damp weather also makes pellet storage a genuine factor, as swollen or dusty pellets can feed poorly and create more ash, which can trigger airflow-related faults that feel like a bigger failure than they really are.
Why regular servicing pays off
This matters because a serviced stove runs more reliably and is easier to diagnose when something does fail. Many manufacturers also specify periodic professional servicing in their manuals, commonly at least annually depending on usage, so keeping records can be important for both performance and warranty support. A straightforward example is the Stanley Lir pellet stove manual, which states the stove should be serviced at least once a year by the service engineer, with frequency depending on usage, reflecting the typical real-world approach for Irish homes where stoves can run hard through winter (Stanley Lir manual PDF). If you’re comparing models and features before you commit, it helps to browse the main wood pellet stoves collection with servicing access and parts availability in mind, as those practical details often decide how painless ownership feels over time.
Frequently Asked Questions About Wood Pellet Stove Repairs
Can I repair a pellet stove myself in Ireland?
You can safely handle basic user maintenance like emptying ash, cleaning the burn pot and glass, checking the hopper for dust build-up, and confirming the stove has power and the correct settings. Anything involving internal electrics, sensors, auger motors, combustion fans, sealed flue joints, or safety devices should be left to a competent, qualified technician, and you should always follow the manufacturer instructions for your specific model. If the stove is shutting down repeatedly, shows persistent error codes, or you suspect a flue or combustion issue, it is usually smarter to stop and get it checked rather than repeatedly resetting it.
What are the most common pellet stove faults in Irish homes?
The most common faults tend to be pellet feed problems (auger jams from dust or poor pellets), ignition failures (worn igniter or restricted airflow), and airflow or pressure faults (dirty burn pot, blocked passages, tired fan, or flue issues). Power cuts and surges can also trigger lockouts or error codes, which is why it is useful to check the manual’s reset procedure and error-code meanings before assuming a part has failed. Storage-related pellet issues are particularly common in Ireland, where damp sheds or garages can affect fuel quality.
How often should a pellet stove be serviced?
Most manufacturers recommend periodic servicing and many manuals reference at least annual servicing, with the exact interval depending on usage, fuel quality, and the installation. As a concrete example, the Stanley Lir pellet stove manual states the stove should be serviced at least once a year by the service engineer, more frequently depending on usage (Stanley Lir manual PDF). Even with a professional service booked in, routine cleaning through the heating season still matters because ash build-up and pellet dust can cause problems long before an annual visit rolls around.
Do power cuts damage pellet stoves?
A single power cut does not usually “damage” a pellet stove, but it can cause a shutdown mid-cycle and trigger a safety lockout or error code. What matters is how the stove restarts and whether unburnt pellets, excess ash, or a partially completed ignition cycle creates a smoky start-up. If power interruptions are common in your area, it is worth discussing protection options like a suitable surge protector with your installer, while keeping any electrical changes aligned with the manufacturer guidance.
Why is my pellet stove not feeding pellets properly?
Pellet feed issues are commonly caused by damp or broken pellets, too much pellet dust (fines) building up in the hopper, a foreign object in the hopper, or an auger jam. It can also be related to settings, sensors, or a worn auger motor, especially if the stove feeds intermittently and then throws an error. If cleaning the hopper area and switching to known good pellets does not solve it, avoid repeated forced restarts and arrange a service call, as forcing a jam can damage components.
Could a flue problem cause pellet stove error codes?
Yes. Pellet stoves depend on controlled airflow, and many models monitor pressure or vacuum to confirm the flue is drawing correctly. A blocked terminal, an issue with seals, excessive ash in internal passages, or an under-performing fan can all trigger pressure-related errors and shutdowns. Because flue integrity affects safe combustion, any suspected flue or combustion-air problem should be treated as a safety issue and checked by a competent professional rather than guessed at.
Browse Wood Pellet Stoves Built for Easy Servicing
If you are weighing up a pellet stove purchase or planning a replacement, choose a model with practical access for cleaning, a sensible hopper size, and a setup that suits your flue route and room. Browse the wood pellet stoves collection to compare options with real-life maintenance and reliability in mind, so you end up with heat you can depend on through an Irish winter.
Services Provided for Wood Pellet Stoves
You can usually get wood pellet stove repairs, routine servicing, spare parts, and day-to-day accessories sorted in Ireland, and the same support often applies to pellet boilers too. Gas Networks Ireland notes that carbon monoxide can be produced by any fuel when it is burning, including wood, and stresses the importance of safety precautions such as having appliances checked and maintained properly, which is why planned servicing matters as much as breakdown repair. The exact service you need depends on whether the fault is mechanical (auger or fan), electrical (ignition or sensors), or related to the flue and draught, because poor combustion and poor ventilation can quickly turn a small issue into a bigger safety and performance problem.
Repairs and servicing (stoves and boilers)
Good servicing is about safety and efficiency, because carbon monoxide guidance highlights the importance of proper maintenance and safe operation for any fuel-burning appliance. In practical terms, a service typically focuses on cleaning the stove or boiler’s combustion areas, checking seals and door gaskets, inspecting the igniter and sensors, confirming the auger and fan are running correctly, and making sure the flue path is clear and drawing properly. That sort of routine attention helps keep ignition reliable, reduces soot and ash build-up, and keeps heat output closer to what the stove is designed to deliver when it is running on good-quality pellets.
Spare parts and accessories
It helps to match parts to your exact model, because pellet appliances rely on specific components and tolerances for safe, steady operation. Common items people look for include burn pots, igniters, door rope seals, sensors, controller parts, ash vacuums, and suitable flue and cleaning accessories, along with the everyday consumables that keep maintenance manageable. You can compare options in the wood pellet stoves collection while you’re checking what accessories and compatible consumables are available, and it is worth keeping an eye on pellet storage and handling too since fuel quality has a direct knock-on effect on servicing intervals and performance.
Technician Credentials and Coverage
Pellet stove repairs tend to go a lot smoother when the person on site is properly registered, familiar with Irish compliance, and able to source the right parts without delay. In practice, OFTEC registration, RECI registration (for electrical work where relevant), and RGII registration (for gas appliances where relevant) are the badges that usually separate “handy” from competent. The key point is that the right credential depends on what’s actually being worked on: combustion, electrics, the flue, or the fuel feed, and it pays to match the technician to the fault rather than the appliance alone.
What qualifications to look for
OFTEC states it runs a competent person scheme for businesses and technicians who are approved to install and maintain oil, solid fuel, electrical and renewable heating equipment, as outlined on its OFTEC home page. For any work that involves fixed wiring, controls, or connections beyond basic plug-in components, you will often be better covered using an electrician registered with RECI rather than relying on general experience alone, especially where certification or insurance questions might arise.
Where technicians typically cover
Most servicing is available nationwide, with faster turnaround usually in Leinster and the South East due to technician density and stock availability. If you’re comparing models before booking a visit, the wood pellet stoves collection helps you confirm the brand, flue type, and likely spares needed, which makes it easier to describe the unit accurately when you get in touch for support.
Frequently Asked Questions About Pellet Stove Technicians in Ireland
Do I need an OFTEC-registered technician for a pellet stove in Ireland?
It is often a strong sign of relevant training and competence, particularly where the work crosses into solid-fuel combustion, flue safety, commissioning, and servicing practices. Pellet stoves also have electrical and electronic components, so if the fault is clearly electrical in nature, a technician may still need to involve a suitably qualified electrician, depending on what needs to be tested or replaced.
When would I need an RECI-registered electrician for a pellet stove repair?
You generally want an RECI-registered electrician when the issue involves fixed wiring, power supplies, control circuits, or anything that could affect electrical safety and compliance. Many pellet stove issues are mechanical or combustion-related, but blown fuses, damaged cables, controller faults, and power problems are common enough that it is worth asking who will handle the electrical side before you book.
Is RGII registration relevant for pellet stoves?
RGII registration applies to gas work. A standard wood pellet stove does not require an RGII technician, but it becomes relevant if your home has gas appliances being worked on at the same time, or if the service call includes any gas-fired equipment. It is still useful as a general rule: match the technician registration to the fuel and system being worked on.
What details should I have ready before booking a pellet stove service call?
Have the make and model, approximate installation date, the error code (if shown), and a clear description of symptoms such as ignition failure, poor heat, unusual noises, or shutdowns. It also helps to know your flue setup (twin-wall, flexible liner, or concentric where applicable) and what pellets you are burning, because fuel quality and airflow are common causes of performance problems.
Do technicians service pellet stoves nationwide in Ireland?
Yes, many service providers cover the full Republic of Ireland, but appointment speed can vary by region. In general, areas with more installers and servicing networks, including parts of Leinster and the South East, can see quicker callouts, while remote areas may require longer lead times or scheduled service runs.
Book the Right Pellet Stove Support With the Right Details
If you’re troubleshooting a pellet stove and want to speed up the repair, start by confirming your stove brand and model so you can describe the unit accurately and avoid delays around parts. Browse the wood pellet stoves collection to match your appliance and note the key details, then get your symptoms and any error codes together before you reach out for service support.
How to Book a Service or Repair
Book a stove service or repair by gathering your stove make and model, noting any fault codes or symptoms, and contacting support by phone or email to request the next available slot. Choose a time when the stove is fully cooled and accessible, then confirm your address and any parking or access details. On the day, expect a safety check, cleaning where needed, and a clear explanation of what’s worn, blocked, or out of adjustment. If you’ve noticed smoke smells, soot, or any carbon monoxide (CO) alarm sounding, treat it as urgent, stop using the stove, ventilate the room, and get the unit checked before you run it again.
1. Get your details ready
Write down the stove brand, model, install date (if you know it), and what fuel you’re using. If you’re still comparing options or you cannot find the rating plate, checking the specs and photos on the wood pellet stoves collection can help you describe your unit more accurately when you call.
2. Make contact and pick a sensible time
Ring 059-9100414 or email sales@stoveboss.ie and ask to book a service or repair. Daytime appointments tend to work best because good diagnostics may involve running the stove briefly, observing the burn, and allowing it to cool again safely before any internal checks are completed.
3. Know what to expect during the visit
Expect the technician to inspect door seals, the flue connection, combustion air, and ash pathways before checking ignition and pellet feed. If it’s a rental, it is still worth confirming alarms are in place and working, as the RTB sets out minimum standards and responsibilities around safety features, including alarms where required, in its guidance for landlords and tenants: Minimum Standards for Rental Properties. Once you know what a typical call-out covers, it becomes much easier to compare it with the routine maintenance most pellet stoves need through the heating season.
Frequently Asked Questions About Booking a Stove Service or Repair in Ireland
How often should a pellet stove be serviced?
Most manufacturers expect at least an annual service, with more frequent attention if you use the stove heavily through the Irish heating season. You will usually do light, routine cleaning yourself (like emptying ash and keeping air paths clear), while a technician handles deeper checks such as seals, ignition components, flue connection integrity, and confirming the stove is burning cleanly and safely. Always follow your specific model manual, as service intervals can vary by brand and how many tonnes of pellets you burn each year.
What information should I have ready when I call to book?
Have the stove make and model, the fuel type you are using, a clear description of the issue, and any fault code shown on the display. It also helps to note when the problem started, whether it happens at ignition or during steady running, and if anything has changed recently (new fuel batch, power cut, chimney work, unusual smells, or alarms). These details help the technician arrive with the right parts and avoid repeat visits.
Should I stop using the stove if I smell smoke or a carbon monoxide alarm sounds?
Yes. Stop using the stove immediately, ventilate the room, and arrange an urgent safety check before using it again. A smoke smell can indicate a flue draught issue, leakage at joints, or a blockage, while a CO alarm indicates a potential life safety risk and must be treated seriously.
How long does a service appointment usually take?
A straightforward service is often completed within about an hour, but allow longer if the stove is very sooted, access is tight, or fault-finding is needed. Diagnostics can take time because the stove may need to be run briefly and then allowed to cool for safe internal inspection. The exact duration depends on the model, installation, and what the technician finds on the day.
Can you service a stove that has not been used in a while?
Yes, and it is usually a sensible idea to do it before you start using it regularly again. Stoves that have sat idle can develop issues like damp-related corrosion, blocked air paths, degraded seals, or nests and debris affecting flues, particularly in Irish conditions. A pre-season check can also catch simple issues such as a worn door rope seal that affects efficiency and burn quality.
Do I need to do anything before the technician arrives?
Let the stove cool fully, clear access around the appliance, and make sure the technician can reach the power supply and any controls. If the stove is in a tight alcove, removing nearby items and ensuring good lighting helps. Having your fuel bag or brand information to hand can also be useful, as pellet quality and fines can contribute to feed or ignition issues.
Book Your Stove Service or Repair With Irish Support
If your pellet stove is showing a fault code, struggling to ignite, or you have noticed unusual smoke smells, get it checked before it turns into a bigger problem. Ring 059-9100414 or email sales@stoveboss.ie to request a service or repair slot, and keep your stove make, model, and symptoms to hand so the right help is lined up quickly. If you are still matching a stove to your space or trying to identify your model, browse the wood pellet stoves collection to compare specifications and narrow it down with confidence.
Frequently Asked Questions about Wood Pellet Stove Repairs
Pellet stove repairs vary depending on the model, the fault, and how clean the fuel burn has been. Most technicians start from the same place your stove maker does: the manufacturer fault codes and service schedule in the manual. The tricky bit is that one symptom, like a lazy flame, can come from pellets, airflow, a blocked flue, or a sensor issue, so you need a methodical check that keeps safety in mind.
What are the most common faults you can troubleshoot first?
If it will not light, start with the basics you can check safely: confirm there are pellets feeding correctly, empty and clean the burn pot (and the holes in it), and make sure the air intake is not blocked by dust or fluff. A poor flame is often down to damp or low-quality pellets, so it is worth checking your pellet storage and switching to ENplus-certified fuel if you are getting lots of fines or clumpy sawdust. If you are comparing models, it also helps to note the parts layout you see in typical units in the wood pellet stoves collection, as access to consumables and cleaning points can make day-to-day ownership noticeably easier.
When should you stop and call a professional?
If you smell smoke indoors, see signs of fumes, trip electrics, notice soot around door seals, or suspect any flue or chimney problem, stop using the stove and arrange a service with a qualified technician. Pellet stoves involve combustion, flueing, and electrics, and faults in any of those areas can turn into a carbon monoxide risk or a fire risk very quickly, so it is not worth guessing. That same safety focus is also the reason routine servicing matters even when everything seems to be running fine.
How often should a pellet stove be serviced in Ireland?
A yearly service ahead of the heating season is a sensible baseline in Ireland, particularly because our damp climate and variable fuel storage conditions can affect how cleanly pellets burn and how quickly ash builds up. Regular servicing helps keep ignition components, fans, sensors, seals, and flueing working as designed, and it also gives you a chance to replace consumables before they fail when you need heat most. If you run the stove daily through autumn and winter, or you notice heavier ash or soot than usual, it can be worth discussing a mid-season check with your technician so performance stays steady when the weather turns.
Seeing a pellet stove or boiler in person helps because real-world details like operating noise, build quality, hopper access, control layout, and flue routing are hard to judge from photos. It also lets you sense how an appliance will suit your home’s layout before you spend money on parts that do not fit or create awkward clearances. This matters most when you are troubleshooting performance, because the “problem” is often the installation setup rather than the appliance itself, and that becomes clearer when you look at the full picture.
Why book an appointment before you travel?
An appointment helps ensure the right models, measurements, and specifications are to hand, so you can compare heat outputs, physical dimensions, and layout details side by side and shortlist from the wood pellet stoves collection with confidence. It also gives you a chance to ask the practical questions that usually decide it, like where the flue can realistically run in an Irish home and how much space you will have for pellet storage.
Why does in-person assessment matter for repairs?
A proper check of clearances, ventilation, and flue condition matters because carbon monoxide can be produced by fuel-burning appliances if they are not correctly installed or maintained. That is exactly why repair decisions should not be guesswork, and why it is worth focusing on the full system including appliance, flue, and air supply rather than chasing a single symptom. For official installation and safety guidance, see Technical Guidance Document J.
Frequently Asked Questions About Visiting a Pellet Stove Showroom in Ireland
What should I bring with me to a pellet stove or boiler stove appointment?
Bring basic room measurements, ceiling height if it is unusual, and photos of the existing fireplace or location where the stove will sit. If you have a chimney, a photo of the fireplace opening and any existing flue liner details helps, along with the approximate flue route if you are going through a wall and up externally. If you know the year of the house and whether it is relatively airtight (common in retrofits with new windows and doors), mention that too because ventilation planning can affect what models suit.
How do I know what heat output (kW) I need for my space?
Heat output depends on room size, insulation level, drafts, and how you use the room, so there is rarely a single perfect number without context. As a rule, many Irish living rooms suit a mid-range output stove, but open-plan spaces, older properties, and rooms with lots of glazing often need more careful sizing to avoid either under-heating or overheating. Bringing measurements and a quick description of insulation upgrades makes it much easier to narrow down a sensible kW range without overbuying.
Are pellet stoves noisy compared to wood-burning stoves?
Pellet stoves typically have some operational noise because they use an auger to feed pellets and often have fans for room air or combustion air, depending on the model. Some are very quiet, others are more noticeable in a silent room, and the sound character can matter as much as the volume. Seeing one in person helps you judge whether it will bother you during TV time or in a kitchen-living space.
What should I look at when comparing pellet stoves in person?
Pay attention to hopper capacity and access, control simplicity, cleaning access, ash pan size, and how the flue outlet is positioned because that affects installation options. Check whether the stove is designed for room heating only or whether it is a boiler model intended to link into radiators and hot water, as the plumbing and safety requirements are different. It is also worth asking about servicing access points and what routine maintenance looks like in a typical Irish heating season.
Do pellet boilers or boiler stoves need a professional installer in Ireland?
Yes, you should use a suitably qualified installer for solid fuel and pellet appliances, particularly where the appliance connects to a heating system, as incorrect installation can create serious safety risks. The flue system, ventilation provision, safe clearances, and any connection to radiators or hot water must follow manufacturer instructions and applicable Irish requirements. It is sensible to confirm your installer’s experience with the specific appliance type you are considering.
Can a showroom visit help diagnose problems with an existing stove setup?
It can help you identify likely issues, especially if you bring clear photos and details of your current appliance, flue route, and symptoms. Many performance problems come down to flue sizing, poor draft, restricted airflow, wet fuel, or unsuitable clearances, rather than a faulty stove. A practical discussion around your existing setup can help you decide whether you are looking at maintenance, a flue upgrade, or a more suitable appliance for the space.
Book Your Pellet Stove Shortlist and Compare Options With Confidence
If you are weighing up pellet stoves or pellet boilers for an Irish home, make the decision easier by browsing the wood pellet stoves collection and shortlisting a few models that suit your room size and layout. When you have your shortlist, ring 059-9100414 or email sales@stoveboss.ie with your measurements and a couple of photos so you can get practical guidance on fit, flue routing, and the kind of setup that will run safely and reliably.
Connecting with StoveBoss Services
Pellet-stove repairs are rarely just one faulty part; they’re usually a chain reaction across fuel quality, airflow, electrics, and the flue. In my experience, manufacturer troubleshooting charts make this point clearly because the same symptom, like failed ignition, can come from ash build-up, damp pellets, or a weak draught. That nuance matters in Ireland, where damp storage conditions and mixed chimney setups are common enough.
Seeing the whole heating system, not just the fault
A good fix looks at the appliance, the full flue route, and how you’re running it day-to-day, because those details decide whether the problem stays solved and the stove runs cleanly through an Irish winter.
Using the wider range to keep repairs practical
If a repair highlights a sizing or installation mismatch, it helps to compare options alongside parts, which is why people often browse wood pellet stoves in Ireland while weighing up the best route back to reliable, efficient heat.
How often should a wood pellet stove be serviced in Ireland?
For most homes in Ireland, an annual service is the safe baseline, ideally before the main heating season starts. If your stove runs daily through the winter, has long burn hours, or you notice heavier ash build-up, a mid-season check can prevent nuisance shutdowns and keep combustion clean.
A proper service typically includes a full internal clean (including hidden passages), inspection of door and ashpan seals, burn pot and ignition checks, fan and motor inspection, sensor and safety cut-out checks, flue inspection, and a combustion setup review so the stove is burning the way it was designed to.
What are the common signs my pellet stove needs repair?
Book a repair if you notice any of the following, especially if the stove was previously running well:
Repeated ignition failures or the stove going out shortly after lighting.
Unusual noises such as grinding, squealing, or rattling, often linked to fans, bearings, or pellet feed components.
Lazy flame, dark glass, or sootier exhaust, which can point to restricted airflow, incorrect settings, poor fuel, or a sealing issue.
Pellets backing up in the auger or hopper or inconsistent feeding.
Smoke smell indoors or signs of leakage around joints, which should be treated as urgent.
Error codes, frequent alarms, or random shutdowns, which can be caused by sensors, vacuum issues, overheating, or blocked flue paths.
If you are unsure, stop using the stove and get it assessed, as a small airflow or seal issue can escalate quickly in real winter use.
Do you offer emergency repair call-outs in Ireland?
Where possible, we prioritise loss-of-heat situations and time-sensitive faults, particularly during colder spells when a pellet stove is the main heat source. Availability depends on technician schedules, your location, and whether parts are required, so the quickest route is to share the stove make and model, the fault code if shown, and what the stove is doing right now.
If there is any sign of smoke spillage, a strong fumes smell, or suspected flue problems, switch the appliance off and do not relight it until it has been checked.
Are you registered to work on pellet appliances in Ireland?
Pellet appliances in Ireland sit under solid fuel and biomass rather than gas, so the key question is whether the technician is competent on the specific make and model, follows Irish Building Regulations for flues and ventilation, and can document the work carried out.
StoveBoss services and repairs are carried out by experienced technicians who work on pellet stoves and boilers and can confirm suitability for your appliance at the time of booking, including any manufacturer requirements for parts, settings, and maintenance records.
Can you help with efficiency issues in pellet stoves?
Yes. Efficiency problems are usually fixable once the real cause is identified, and it is often a combination of fuel quality, airflow, sealing, and calibration rather than a single failed part. A typical efficiency-focused visit looks at:
Combustion air path: burn pot condition, ash and fines in hidden channels, and whether the stove is getting stable air.
Door and ashpan seals: worn gaskets can pull false air and disrupt the burn.
Flue condition and draught: restrictions, incorrect configuration, or leaks can reduce heat transfer and stability.
Fan performance and sensors: weak extraction, dirty blades, or drifting sensors can cause over-fuelling or under-fuelling.
Control settings and calibration: feed rates and air trims are matched to your fuel and installation.
If your running costs are creeping up or the heat output feels uneven, getting practical maintenance tips by email can help you stay ahead of the usual winter issues, while also making it easier to spot when it is time to book a service.
Stay warm and efficient by signing up for our newsletter for practical, Ireland-relevant stove maintenance and repair tips, including what to watch for during heavy winter use.
If you would rather get a technician to check your stove, you can also arrange a service or repair directly through StoveBoss contact and booking.